TM 9-2350-222-20-1-4
LEFT TAILLIGHT - STOPLIGHT ASSEMBLY REPAIR (Sheet 2 of 3)
Remove two small stoplight and taillight lamps (E).
3.
Remove large blackout drive lamp (F).
4.
5.
Using Phillips screwdriver, remove two screws (G) and lockwashers (H) from socket and wiring
6.
Using Phillips screwdriver, remove three screws (K) from plate (L) and grommet (M).
7.
Remove socket and wiring assembly (J) with fingers by pressing out grommet (M), from body
assembly (N).
CLEANING AND INSPECTION:
Inspect taillight and components for cracks. Replace any cracked items
1.
Inspect for mechanical damage and wear. If damaged or worn, replace.
2.
Inspect taillight assembly for corrosion. Corroded area which cannot be cleaned with crocus cloth
3.
(Item 14, Appendix D) or steel wool (Item 55, Appendix D) is cause for replacement of that item.
TA140190
Go on to Sheet 3
10-233