TM 9-2350-222-20-1-4
LEFT TAILLIGHT - STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS: 9/16 in. combination box and open end wrench
SUPPLIES: Silicone compound (Item 32, Appendix D)
Masking tape (Item 57, Appendix D)
Pencil
Lockwasher (MS35338-42) (2 required)
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURE:
Remove transmission shroud (page 9-19)
NOTE
Inspect leads (A) and leads (B) for
numbered tags (C). If leads do not
have tags, use masking tape (Item
5 7 , Appendix D) and pencil to
number leads 21, 22, and 24.
1. Reach through exhaust door opening and
disconnect three leads (A) from hull connectors
(B).
2. Slide three connector shells (D) back on taillight
leads to expose three slotted washers (E).
NOTE
Lubricant may be needed on leads
(A) to remove shells (D).
3. Remove three slotted washers (E) and three
shells (D).
Go on to Sheet 2
10-229