TM 9-2350-222-34-1
BRAKE SLAVE CYLINDER REPAIR (Sheet 6 of 6)
11.
Remove mounting nut (T) from vise.
12.
Position mounting nut (T) on slave cylinder (D).
Using hammer, install pin (V) through mounting
nut (T).
13.
If cylinder (D) will not be used immediately, seal
open port with masking tape (Item 25, Appendix
14.
Install brake slave cylinder (TM 9-2350-22220-
1).
End of Task
TA130750
Change 5 8-20
