TM 9-2350-222-34-1
TRANSMISSION REPLACEMENT (Sheet 24 of 24)
69. Position rod (CW) into bracket (CH) and, using
9/16 inch wrench, install screw (CX) through
bracket (CH) and rod end (CY).
70. Fill transmission with oil (LO 9-2350-222-12).
71. Install engine shroud and supports (TM 92350-
222-20-1).
72. Install right angle drive, clutch and pump (TM 9-
2350-222-20-1).
73. Install powerplant (TM 9-2350-222-20-1).
End of Task
TA130713
6-45/(6-46 blank)
