TM 9-2350-222-34-1
TRANSMISSION REPLACEMENT (Sheet 14 of 24)
CAUTION
When mating transmission to engine,
be sure to position electrical wiring
aside to prevent wiring from being
caught between mounting surfaces.
9. Aline transmission dowel pins with engine, and
carefully advance transmission until transmission
mounting flange is in contact with engine
transmission adapter.
inch socket, install screw (J), washer (K), and nut (L)
on left and right side of transmission.
11. Using fabricated wrench or 5/8 inch wrench, install
17 screws (M), lockwashers (N), and flat washers (P)
that secure transmission to engine (Q).
12. Remove transmission sling from transmission.
13. Using 5/8 inch socket, remove six screws (R) and
lockwashers (S). Remove cover (T) and gasket (U).
Throw gasket away and turn cover in to maintenance
office for disposition.
Change 5 6-35
