TM 9-2350-222-34-1
ACCELERATOR LINKAGE ASSEMBLY REPLACEMENT (Sheet I of 5)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Cleaning and Inspection
Installation
TOOLS: Long, round nosed pliers
9/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
1-7/16 in. combination box and open end wrench
5/16 in. combination box and open end wrench
3/32 in. socket head screw key (allen wrench)
SUPPLIES: Cotter pin (MS24665-132)
Seals (8711329) (2 required)
REFERENCES:
TM 9-2350-222-10
TM 9-2350-222-20-1
PRELIMINARY PROCEDURES: Remove powerplant (TM 9-2350-222-20-1)
Traverse turret until access is gained to accelerator linkage through
turret platform access door CIM 9-2350-222-10)
NOTE
Linkage passes through bulkhead at
center of turret near floor of vehicle
NOTE
The linkage assembly is located in the left
forward end of the engine compartment.
TA252618
Go on to Sheet 2
Change 1 4-98