TM 9-2360-222-34-1
FUEL PRIMER OUTLET FROM ENGINE TUBE ASSEMBLY REPLACEMENT (EARLY MODEL)
(Sheet 4 of 6)
3. Install two clamps (E) and (F) on primer outlet
tube (G).
4. Plaice clamp (H) in position on primer outlet tube
(G).
5. Place tube in position by inserting it from engine
compartment and passing rear end of tube G)
behind primer inlet tube (J) and clamp (K).
6. Using 9/16 inch wrench, reach through access
opening (L) and connect nut (M) of tube (G
nipple (A).
Go on to Sheet 5
TA252596
Change 1 4-77
