TM 9-2350-222-34-1
FUEL SHUTOFF CABLE ASSEMBLY REPLACEMENT (Sheet 2 of 5)
REMOVAL:
1. Open turret platform access door and traverse
turret (TM 9-2350-222-10) to gain access to
bulkhead housing (A).
2. Using 1 inch wrench, remove nut (B) from
bulkhead housing (A).
3. Slide nut (B) back onto cable assembly (C).
4. Slide washer (D) back onto cable assembly
(C).
5. Using 7/16 inch socket, remove screw (E) and
lockwasher (F) holding front cable clamp (G) to
mounting block on torsion bar cover. Remove
clamp (G). Throw lockwasher away.
NOTE
Screws (H) may be hidden beneath suction
hose.
6. 7/16 inch socket and 7/16 inch wrench,
remove two screws (H) and lockwashers
(J) from mounting blocks on hull. Throw
lockwashers away.
7. Remove clamps
(K)
from
cable
assembly.
Go on to Sheet 2.1
Change 1
4-70
