TM 9-2350-222-20-2-3-2
36-87. COMMANDER'S CONTROL PANEL REMOVAL PROCEDURE
TOOLS: 7/16" combiantion wrench
PERSONNEL: One
REFERENCES: JPG for procedure to disconenct electrical connections
EQUIPMENT LOCATION INFORMATION:
FOLDOUT
CALLOUT
EQUIPMENT
11
Driver's Master Control Panel
17
Cupola Azimuth Gear Box
EQUIPMENT CONDITION: Driver's master control panel MASTER BATTERY switch set to OFF
FRAME 1
Step
Procedure
1.
Disconnect electrical connector (1) from commander's control panel (2) (JPG).
2.
Using wrench, remove four screws (2) and four lockwashers (4).
3.
Remove commander's control panel (2).
END OF TASK
Para 36-87
36-194
