TM 9-2350-222-20-2-3-2
36-31.
BACKREST PAD INSTALLATION PROCEDURE (CONT)
Step
Procedure
1.
Place pad assembly (1) in mounting position on guard (2) so that tab (3) is in line with
notch (4).
Using hammer, bend ten tabs (3) around ten notches (4) and to back side of guard (2).
2.
3.
Place assembled backrest pad and guard in mounting position in cupola.
4.
Using cross tip screwdriver, put six screws (5) with six lockwashers (6) and six flat
washers (7) through guard (2) to cupola.
5.
Using flat tip screwdriver, put two screws (8) with two washers (9) through the ends of
guard (2) to cupola.
END OF TASK
Para 36-31 Cont
36-70
