TM 9-2350-222-20-2-3-2
BREECH OPERATING MECHANISM REMOVAL PROCEDURE (CONT)
32-3.
PROCEDURE
Using adjustable wrench, loosen two nuts (1) on two detents (2).
1.
2.
Using screwdriver, remove two detents (2).
Using spanner wrench, turn spring adjuster (3) counterclockwise until threaded pin (4) lines up with
3.
detent hole (5).
Using screwdriver, unscrew pin (4).
4.
Using metal rod, push pin (4) out through detent hole (5).
5.
6.
Remove spring acdjuster (3).
7.
Support crank (6) with right hand and with left hand, pull handle and spring assembly (7) from
breechring (8).
Remove crank (6) from breech ring (8).
8.
GO TO FRAME 2
Para 32-3 Cont
32-5
