TM 9-2350-222-20-2 -3-2
30-9.
HOLD-CLOSE MECHANISM INSTALLATION PROCEDURE (CONT)
Step
Procedure
1.
Using hammer, attach release handle (1) to handle (2) with spring pin (3).
NOTE
Use as many shims as needed to be sure hatch locks
when closed.
2.
Put sealing compound on screw (4) (JPG).
Using wrench, attach handle (2) to hatch (5) with screw (4), washer (6), bushing (7),
3.
shims (8). and spring (9).
4.
Squeeze release handle (1) and turn handle (2). Check to make sure hatch (5) locks and
unlocks easily,
5.
Using torque wrench, tighten screw (4) to between 9 and 11 foot-pounds (JPG).
END OF TASK
Para 30-9 Cont
30-24