TM 9-2350-222-20-2-3-2
24-17. SUPPORT TUBE INSTALLATION PROCEDURE
TOOLS: 1-1/8" socket wrench (1/2" drive)
3/4" socket (1/2" drive)
1/2" drive ratchet
9" extension (1/2" drive)
1/2" drive breaker bar
PERSONNEL: One
REFERENCES:
TM 9-2350-222-10 for procedures to:
Traverse turret
Set turret traverse lock to LOCKED
EQUIPMENT LOCATION INFORMATION:
CALLOUT
FOLDOUT
EQUIPMENT
11
Commander's Seat
7
Turret Traverse Lock
Step
Procedure
1.
Traverse turret until support tube (1) can be reached from driver's compartment (TM-
10).
2.
Set turret traverse lock to LOCKED (TM-10).
3.
Put support tube (1) in mounting position.
NOTE
Step 4 is done from driver's compartment.
4.
Using 3/4" socket wrench, attach support tube (1) to turret floor with two screws (2),
two flat washers (3), two lockwashers (4), and two nuts (5).
5.
Using 1-1/8" socket wrench, attach upper support bracket to turret with two screws (6)
and two flat washers (7).
END OF TASK
Para 24-17
24-40
