TM 9-2350-222-20-2-3-2
24-15. ELEVATION ADJUST HANDLE ASSEMBLY PROCEDURE (CONT)
Step
Procedure
1.
Place locking pin (1) half way into bracket (2).
2.
Put spring (3) and pin retainer (4) on locking pin (l).
3.
Push locking pin (1) into bracket (2).
NOTE
To put in spring pin (5) in next step, press against pin
retainer (4) to compress spring (3) and uncover the
spring pin mounting hole.
4.
Using hammer and punch (6), tap new spring pin (5) through locking pin (1).
GO TO FRAME 2
Para 24-15 Cont
24-35
