TM 9-2350-222-20-1-5
SPEEDOMETER SHAFT ADAPTER ASSEMBLY REPLACEMENT AND REPAIR
(Sheet 1 of 2)
TOOLS: 7/16 in. socket with 1/2 in. drive
1 in. combination box and open end wrench
Ratchet with 1/2 in. drive
5 in. socket extension with 1/2 in. drive
Flat-tip screwdriver
SUPPLIES: Lockwasher (MS35333-40) (2 required)
Preformed packing (MS28775-212)
Grease (Item 36, Appendix D)
REMOVAL:
1.
Using 1 inch wrench, disconnect flexible shaft assembly (A) from speedometer shaft adapter (B).
2.
Using 7/16 inch socket, remove two screws and lockwashers (C). Throw lockwashers away.
3.
Remove speedometer shaft adapter assembly (B).
Go on to Sheet 2
TA147653
