TM 9-2350-222-20-1-5
FRONT FENDER (CENTER, LEFT AND RIGHT) STOWAGE BOX COVER REPAIR
(Sheet 4 of 4)
Place lock (E) in position on stowage
5.
cover (B).
Using blacksmith's anvil and hammer,
6.
install six new rivets (F).
Place handle (G) in position on lock (E).
7.
8.
Place tongue (H), lockwasher (J), and nut (K)
on handle (G).
Place stowage box cover (B) in position on
9.
stowage box.
10. Using 9/16 inch wrench, install twelve screws
hinges (N) and six tapping plates (P) to
cover (B).
11. Close cover (B) and check for positive locking
of latch assemblies. Add shims (Q) as neces-
sary to assure positive locking.
12. Using 9/16 inch wrench, tighten nut (K)
until hole in handle (G) alines with grooves
in nut.
13. Using pliers, install new cotter pin (R).
End of Task
TA253639
16-184