TM 9-2350-222-20-1-5
TURRET INFLATABLE SEAL MANIFOLD, GAGE, AND RELATED PARTS REPLACEMENT (Sheet
10 of 10)
TEST:
1.
Make sure drain cock (A) is closed (turned
completely clockwise).
2.
While observing pressure gage (B), operate
pump (C) and inflate turret seal to 25 psi.
3.
If after 4 hours there is more than 1 psi
pressure drop, refer to troubleshooting (page
4-977).
4.
Release pressure from turret seal by opening
drain cock (A) (turned completely
counterclockwise).
End of Task
TA140666