TM 9-2350-222-20-1-5
EXHAUST DOORS REPLACEMENT (Sheet 3 of 4)
INSTALLATION:
1.
screws (A) to secure two deflectors (B) and
(C) mounted on right side exhaust door (D).
Using 9/16 inch socket with extension,
tighten screws.
2.
Using sling with hoist, lift door to mounting
position at rear of hull.
With second person, mount door to two hinges.
3.
4.
Install washers (E) (as many washers as
necessary to aline door screw holes to hull
mating holes).
5.
Using ball peen hammer, drive two headed
straight pins (F) into two door hinges.
6.
Using ball peen hammer with pliers, install
two new cotter pins (G) through straight
pins (F).
7.
Remove sling.
8.
Close exhaust door (H).
9.
Close exhaust door (J).
Go on to sheet 4
TA253551