TOWING PINTLE REPAIR (Sheet 1 of 5)

Disassembly

Cleaning and Inspection

Assembly

Installation

TOOLS:

1-5/16 in. open end wrench

3-1/4 in. socket with 1 in. drive

Hammer

Ratchet with 1 in. drive

Long round nose pliers

1-1/2 in. socket with 3/4 in. drive

Flat-tip screwdriver

1-5/16 in. socket with 3/4 in. drive

Center punch

8 in. extension with 3/4 in. drive

3/8 in. drive punch

Ratchet with 3/4 in. drive

59-62 in. pinchpoint crowbar

1-1/2 in. open end wrench

SUPPLIES: Dry cleaning solvent (Item 54, Appendix D)

Cotter pins (MS24665-359) (2 required)

Lockwasher (MS35338-52) (4 required)

PERSONNEL: Two

REMOVAL:

Holding nuts (A) with 1-5/16 inch wrench and

using 1-5/16 inch socket, remove four bolts (B),

lockwashers (C), and nuts (A). Throw

Remove towing pintle (D) from vehicle.

Go onto Sheet 2