TM 9-2350-222-20-1-4
BRAKES ADJUSTMENT (Sheet 6 of 8)
17. Release brakes.
18. Using 7/16 inch wrench, turn brake
adjusting worm (F) in direction of arrow (G)
until index line (B) lines up with index mark
19. If index line (B) marked A does not move back
to index mark (C), brake is too tight.
20. Using 7/16 inch wrench, turn brake adjusting
--
worm (F) about 25 turns toward rear of vehicle.
NOTE
Always try to bring index line (B) marked A and index mark (C)
(F)
worm
into
line
by
turning
brake
adjusting
counterclockwise.
CAUTION
Always release brakes before making adjustments.
21. Using 7/16 inch wrench, turn brake adjusting worm (F) in direction of arrow (G) until index line
(B) marked A lines up with index mark (C) when brakes are applied.
Go on to Sheet 7
TA140317
13-7