TM 9-2350-222-20- 1-4
BRAKES ADJUSTMENT (Sheet 5 of 8)
9.
Using 1 inch wrench, install brake
adjusting worm cap (D).
Fully apply brakes (TM 9-2350-222-10).
10.
Check whether index line (B) marked A and
11.
index mark (C) are lined up.
If index line (B) marked A and index mark (c)
12.
are lined up, brakes are adjusted. Release
brakes and go to step 24.
13. If index line (B) marked A and index mark
(C) are not lined up, release brakes and go on
to step 14.
Using 1 inch wrench, remove brake
14.
adjusting worm cap (D).
Using 15/16 inch wrench, loosen locknut (E).
15.
Fully apply brakes (TM 9-2350-222-10). If index
16.
line (B) marked A moves past index mark (C),
brake is too loose.
TA140316
Go on to Sheet 6
Change 5
13-6
