TM 9-2350-222-20-1-4
ENGINE STARTER WIRING HARNESS REPLACEMENT (2D ENGINE) (Sheet 2 of 6)
REMOVAL:
1.
Using cutting pliers, cut all cable ties (A).
2.
Using 3/4 inch wrench, remove nut and
lockwasher (B). Remove heavy cables (C) and
(D) and ground strap (E) from starter (F). Do
not remove small cable (G). Throw
lockwasher away.
3.
Using 3/4 inch wrench, remove nut and
Iockwasher (H). Remove heavy cables (J) and
(M). Throw lockwasher away.
4. Using 1/2 inch socket, remove screws and
lockwashers (N) from cable clamps (P); throw
lockwashers away. Remove cable clamps.
Go on to Sheet 3
10-373
