TM 9-2350-222-20-1-4
RIGHT TAILLIGHT - STOPLIGHT ASSEMBLY REPAIR (Sheet 2 of 3)
3.
Remove two stoplight and taillight lamps (E).
4.
Throw lockwashers away.
5.
Using Phillips screwdriver, remove three screws (H) from plate (J) and grommet (K).
6.
Remove socket and wiring harness assembly (L) with fingers by pressing out grommet (K)
from body assembly (M).
CLEANING AND INSPECTION:
1.
Inspect taillight assembly for corrosion. Corroded areas which cannot be cleaned with crocus cloth
(Item 14, Appendix D) or steel wool (Item 55, Appendix D) are cause for replacement of that item,
2.
Inspect taillight and components for cracks. If any items are cracked, replace.
3.
Inspect for mechanical damage and wear. If damaged or worn, replace.
Go on to Sheet 3
TA139782
10-227
