TM 9-2350-222-20-1-4
HEADLIGHT STOWAGE LAMPHOLDER REPAIR AND REPLACEMENT (Sheet 1 of 2)
TOOLS: Flat-tip screwdriver
3/8 in. combination box and open end wrench
SUPPLIES: Spring clip (7739925)
Lockwasher (MS35338-44) (3 required)
NOTE
There are two lampholders at
driver's station.
R e m o v a l and
installation are the same for each
lampholder.
REMOVAL:
1.
Using hand, remove dust cap (A) by turning
counterclockwise.
2.
Using wrench, remove three screws (B),
lockwashers (C), and flat washers (D). Throw
lockwashers away.
3.
Remove lampholder (E).
GO on to Sheet 2
TA139713
10-157
