TM 9-2350-222-20-1-4
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 16 of 22)
Fuel Tank Selector Switch Replacement (Sheet 1 of 2)
TOOLS: Flat-tip screwdriver
SUPPLIES: Silicone compound (Item 32, Appendix D)
Lockwasher (MS35333-38) (2 required)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Remove three leads (circuits 30, 28, and 31) from rear of switch (A) by pulling out.
2.
Using screwdriver, remove two screws (B) and
panel. Throw lockwashers away.
3.
Remove switch (A).
INSTALLATION:
1.
Apply silicone compound (Item 32, Appendix D)
to three switch (A) leads (circuits 30, 28, and
31).
Place switch (A) in position in panel.
2.
3.
Using screwdriver, install two screws (B) and
panel.
Go on to Sheet 2
TA139699
10-143