TM 9-2350-222-20-1-4
MASTER CONTROL PANEL REPAIR (Sheet 45 of 65)
Personnel Heater Wiring Harness Replacement (Sheet 2 of 5)
3.
Using cross-tip screwdriver on screw (F) and wrench on nut(G), remove four screws (F),
lockwashers (H), and nuts (G) securing connector (J) to panel (E). Throw lockwashers away.
4.
Remove connector (J) from panel and position aside.
5.
Using pliers, remove nut (K) and lockwasher (L) securing guard (M) and switch (N) to panel,
Throw lockwasher away.
6.
Remove guard (M) and switch (N).
`7.
Using flat-tip screwdriver, remove screws and washers securing circuits 400/405, 405, 401, 402,
and 407 to switch (N).
TA139655
Go onto Sheet 3
10-99
