TM 9-2350-222-20-1-4
ENGINE FUEL INJECTION PUMP FUEL SHUTOFF LEAD REPLACEMENT (Sheet 2 of 5)
REMOVAL:
Using 7/8 inch wrench, loosen retaining nut (A) on electrical connector (B).
1.
Remove connector (B).
2.
Using Phillips screwdriver and 1/4 inch
3.
wrench, remove four screws (C), and
lockwashers and nuts (D) on connector (E).
Throw lockwashers away.
Remove connector (E) from engine shroud (F).
4.
Using flat-tip screwdriver and 3/8 inch wrench,
5.
remove three loop clamps and self-locking nuts
(G). Throw self-locking nuts away.
/
Go on to Sheet 3
TA139591
10-36
