TM 9-2350-222-20-1-4
STARTER LOW VOLTAGE RELAY SOLENOID (TOP MOUNTED) REPLACEMENT (Sheet 2 of 2)
INSPECTION:
Inspect wiring harness and electrical connector for missing, broken, cracked, or bent pins, or
damaged wires. Replace as necessary.
INS TALLATION:
1.
Position relay solenoid (A) on
mounting bracket (B) with electrical
connector facing rear of vehicle.
2.
Position ground lead (C) on relay
solenoid (A) and install two
lockwashers (D) and screws (E).
Use socket, extension and
ratchet to tighten screws.
3.
Connect electrical connector
(F) to relay solenoid (A). Use
spanner wrench to tighten
electrical connector (F).
End of Task
10-34.2
Change 5
