TM 9-2350-222-20-1-3
MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY
REPLACEMENT
(Sheet 6 of 7)
4.
Using 9/16 inch wrench, install elbow (F) on
adapter (G).
5.
Using 9/16 inch wrench on elbow (F) and
adjustable wrench on tee (H), install elbow (F)
on tee (H).
Using 1/2 inch wrench, install adapter (G),
6.
elbow (F), and tee (H) to solenoid valve (J).
7.
Using 9/16 inch wrench, install tube assembly
line nut of tube (K) on tee (H).
8.
Using 9/16 inch wrench, install line nut of tube
assembly (C) on tee (H).
9.
Position solenoid valve (J) on bracket (L).
10,
Using 5/16 inch wrench, install two screws and
washers (M) through bracket (L) and into
solenoid valve (J).
11.
Using fingers, install grommet (E) in slot of
lower engine cooling fan shroud (N).
12.
Using both hands, install lower engine cooling
fan shroud (N) over mounting holes in engine
bulkhead.
13.
Using hands, manually install four screws and
washers (P) in lower engine cooling fan shroud
(N).
14.
Using socket and 1/2 inch wrench, tighten four
screws and washers (P) in lower engine cooling
fan shroud (N).
Go on to Sheet 7
TA141566
7-386
