TM
9-2350-222-20-1-3
PRIMER PUMP REPLACEMENT (LATE MODEL) (Sheet 3 of 4)
6.
and flat washers (J) securing primer pump (F)
to hull. Throw lockwashers away.
Remove primer pump (F).
7.
CLEANING AND INSPECTION:
1.
Clean adapter threads with wire brush.
2.
Inspect adapters for cracks or crossed threads.
Replace as required.
INSTALLATION:
1.
Place primer pump (A) in position in vehicle.
2.
Using socket, install four bolts, new
primer pump (A) to hull.
3.
Place sealing compound (Item 28, Appendix
D) on male pipe threads of two adapters (C).
4.
Using 1/2 inch wrench, install two adapters
(C) in primer pump (A).
Go on to Sheet 4
TA253325
Change 1 7-361