TM9-2360-222-20-1-3
PRIMER PUMP REPLACEMENT (EARLY MODEL) (Sheet 2 of 4)
REMOVAL
Disconnect two electrical connectors (A) lo-
1.
cated on handle support bracket (B) by pull-
ing apart.
Raise handle to the up position. Using 7/16
2.
inch wrench, remove bolt and wire bracket
(c).
Using 9/16 inch wrench, remove heater tube
nut (D) and outlet tube nut (E) from primer
pump (F).
Pull back two tubes (G) from primer pump
4.
(F).
5.
Using 9/16 inch wrench, remove inlet tube
nut (H) from tee (J).
6.
Using 1/2 inch wrench, remove tee (J) and
adapter (K) from primer pump (F).
TA253255
Go on to Sheet 3
7-358.4 Change 1
