TM 9-2350-222-20-1-3
FUEL-WATER SEPARATOR OPERATIONAL TESTS (2D ENGINE) (Sheet 1 of 11)
PROCEDURE INDEX
PROCEDURE
PAGE
Manual Drain Test
Automatic Drain Test
7-269
15-Second Drain Test
Sequential Drain Test
TOOLS:
Slip joint pliers
Ratchet with l/2 in. drive
6 in. adjustable wrench
l/2 in. combination box and open end wrench
1/2 in. socket with l/2 in, drive
7/16 in. combination box and open end wrench
5 in, extension with l/2 in. drive
9/16 in. combination box and open end wrench
FABRICATED TOOLS: 0ne 3ft cable (Figure F-8, Appendix F)
One 10ft cable (Figure F-7, Appendix F)
SUPPLIES:
24 vdc power source
Fuel can (1 gal. capacity)
l/8 in. pipe plug (2 required)
Watch with second hand
Metal container
Drip pan
(1 gal. capacity) (2 required)
Lockwasher (4 required)
Rags (Item 65, Appendix D)
Lockwasher (8 required'
Gasket
Lockwasher (8 required)
Parts kit
PERSONNEL: TWO
PRELIMINARY PROCEDURE:
Remove 2D powerplant (page 5-14)
WARNING
Fuel is very flammable and can explode
easily. To avoid serious injury or death,
keep fuel away from open fire and keep
fire extinguisher within easy reach when
working with fuel. Do not work on fuel
system when engine is hot. Fuel can be
ignited by hot engine. When working with
fuel, post signs that read `NO SMOKING
WITHIN 50 FEET OF VEHICLE."
l
Fuel is slippery and can cause falls. To
avoid injury, wipe up spilled fuel with rags.
Go on to Sheet 2
All data on pages 7-259 thru 7-265 deleted.
Change 4
(7-265 blank) /7-266
