TM 9-2350-222-20-1-3
FUEL RETURN HOSE (LEFT FUEL TANK) REPLACEMENT (Sheet 2 of 2)
REMOVAL:
Using 1-1/4 inch wrench to hold fitting (A), use
1.
1-1 /2 inch wrench and loosen fitting (B) from
elbow (C).
2.
Using 1-3/8 inch wrench, loosen fitting (D) from
fuel tank (E).
3.
Carefully remove hose (F) from elbow (C)
fuel tank (E).
INSTALLATION:
CAUTION
Make sure that drain plugs of both
fuel tanks are correctly sealed.
Lightly coat threads of each hose end fitting
1.
with sealing compound (Item 24, Appendix D).
2.
Position hose (A) onto elbow (B) and fuel tank
mount (C).
Using 1-3/8 inch wrench, tighten fitting (D) to
fuel tank mount (C).
4.
Using 1-1/4 inch wrench to hold fitting (E), use
1-1/2 inch wrench and tighten fitting (F) to
elbow (B).
5.
6.
Allow engine to run for a brief time while
7.
checking for leaks. If a leak is detected, stop
engine and tighten fittings.
8.
9.
End of Task
TA148984
7-250