TM
9-2360-222-20-3
(Sheet 3 of 3)
FUEL RETURN TUBE ASSEMBLY (RIGHT FUEL TANK)
INSPECTION:
Inspect threaded components for thread damage. Replace
INSTALLATION:
Using 1-3/8 inch wrench, install adapter (A) to
1.
fuel tank selector valve (B).
2.
Install clamp (C) to tube (D).
Using 13/8 inch wrench and 1-1/2 inch
3.
wrench, loosely install left nut of tube (D) to
fuel tank selector valve adapter (A).
Using 1-1/2 inch wrench and 1-3/8 inch wrench, loosely install right nut of tube (D) to right fuel
4.
tank return hose (E).
5.
Using socket, secure clamp (C) and tube (D) to hull floor with screw (F) and new lockwasher (G).
6.
Tighten right and left nuts of tube (D).
7.
Install 2A powerplant (page 5-14) or 2D powerplant (page &37).
Fill fuel tanks.
8.
End of Task
TA148986
7-248
