TM 9-2350-222-20-1-3
INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet
of 5)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
7-235
Inspection
Installation
TOOLS: Automotive wrench
7/8 in. combination box and
1-1/8 in. open end wrench
open end wrench
9/16 in. socket with 1/2 in. drive
9/16 in. combination box and
Ratchet with 1/2 in. drive
open end wrench
1-1/4 in. open end wrench
1 in. combination box and
Vise
open end wrench
7/16 in. socket with 1/2 in. drive
SUPPLIES: Lockwasher (MS35338-46) (2 required)
Lockwasher (MS35338-44)
PRELIMINARY PROCEDURES: Remove
powerplant (page 5-1)
Drain fuel tanks
REMOVAL:
1.
Using 7/8 inch wrench to hold connector (A), use 1-1/8 inch wrench on connector (B) and remove
hose (C) from elbow (D).
2.
Using automotive wrench, remove elbow (D) from right fuel tank (E).
Go on to Sheet 2
7-235
