TM 9-2350-222-20-1-3
PRIMER PUMP FUEL INLET OR OUTLET HOSE ASSEMBLY REPLACEMENT (EARLY MODEL)
I
(Sheet 1 of 2)
TOOLS:
5/8 in. combination box and open end wrench
9/16 in. combination box and open end wrench
3/4 in. combination box and open end wrench
10 in. adjustable wrench
SUPPLIES:
Lint-free cloth (Item 12, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Sealing compound (Item 27, Appendix D)
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-1)
REMOVAL:
1.
Clean fittings with lint-free cloth (Item 12,
Appendix D) moistened with dry cleaning sol-
vent (Item 54, Appendix D).
2.
Using adjustable wrench, hold elbow (A) to
keep from turning.
3.
Using 9/16 inch wrench, remove hose assem-
bly (B) or (C) from elbow (A).
4.
Using 9/16 inch wrench and 3/4 inch
wrench, remove coupling assembly (D) from
hose assembly (B) or (C).
5.
Using adjustable wrench to hold elbow (A),
use 5/8 inch wrench and disconnect tube nut
(E) from elbow (A).
Go on to Sheet 2
TA253208
Change 1
