TM 9-2350-222 -20-1-3
FUEL TANK CROSSOVER VALVE REPLACEMENT (Sheet 2 of 7)
REMOVAL:
Using diagonal cutting pliers, remove lockwire (A) from cross over control valve (B).
1.
2.
Using diagonal cutting pliers, reach through crossover access and remove lockwire (C) from three
screws (D) holding preformed hose (E) to left fuel tank (F), and three screws (G) holding preformed
hose (E) to right fuel tank (H).
3.
Using 1/2 inch wrench, remove three screws and washers (D) holding preformed hose (E) to left
fuel tank (F).
4.
Using 1/2 inch wrench, remove three screws and washers (G) from valve (B) to right fuel tank (H).
Go on to Sheet 3
TA141577
7-191
