TM 9-2350-222 -20-1-3
FUEL TANK (LEFT AND RIGHT) DRAIN PLUG REPLACEMENT (Sheet 1 of 1)
TOOLS: 10 in. extension with 1/2 in. drive
Hinged handle with 1/2 in. drive
3/4 in. combination box and open end wrench
SUPPLIES: Grease (Item 36, Appendix D)
Lockwasher (MS35338-67) (4 required)
PRELIMINARY PROCEDURE:
REMOVAL:
NOTE
Fuel drain plug is removed to drain fuel tanks (preliminary
procedures). Procedures are the same for left and right fuel
tanks.
1.
Using wrench, remove four screws (A) and lockwashers (B). Hold access cover to keep from
2.
Remove access cover (C) and gasket (D).
3.
Using extension and handle, remove drain plug (E).
INSPECTION:
Inspect fuel drain plug for stripped threads or damaged flats. Replace unserviceable plug.
INSTALLATION:
1.
Coat fuel drain plug threads with grease (Item 36, Appendix D).
2.
Using extension and hinge handle, install fuel drain plug (E).
3.
Install fuel drain access cover (C) and gasket (D). Secure with four screws (A) and new
lockwashers (B).
Using wrench, tighten four screws (A).
4.
Fill fuel tanks.
5.
7-189