TM 9-2350-222-20-1-3
FUEL TANK PLUG AND BRACKETREPLACEMENT (Shoot 2 of 3)
Using 1/2 inch socket and 1/2 inch
4.
wrench, remove screw (J) and nut (K)
holding clamps (L) and (M).
Remove clamps (L) and (M).
5.
Remove bracket (F) from fuel tank.
6.
INSTALLATION:
Apply a coat of grease (Item 36, Appendix
1.
D) to threads of plug (A).
1.1. Using 9/16 inch wrench, install plug (A) in
fuel tank (B).
Install hose clamp (C) and (D) to bracket
2.
(G), using screw (E) and nut (F).
Using 1/2 inch socket and 1/2 inch
3.
wrench, tighten screw (E) and nut (F).
Install bracket (G) using two screws (H),
4.
washers (J), and new lockwashers (K).
Using 1/2 inch socket, tighten screws (H).
5.
TA253268
Go on to Sheet 3
7-176 Change 1
