TM 9-2350-222-20-1-3
AIR CLEANER (ARMORED) BLOWER FAN GROUND LEAD REPLACEMENT
(Sheet 1 of 2)
7/16 in. socket with 1/2 in. drive
TOOLS:
Ratchet with 1/2 in. drive.
10 inch extension with 1/2 in. drive.
SUPPLIES: Lockwashers (MS35335-33) (2 required)
REFERENCE: TM 9-2350-222-10).
PRELIMINARY PROCEDURE: Remove air cleaner cover and gasket (page 7-148,
steps 1 thru 4).
WARNING
If NBC exposure is suspected, all air filter
media should be handled by personnel
wearing protective equipment. Consult
your NBC Officer or NBC NCO for appro-
priate handling or disposal instructions.
REMOVAL:
1.
Disconnect two connectors (A) from blower
leads (B).
2. Using socket, remove screw (C) and two
lockwashers (D) securing ground lead (E) to
boss (F). Throw lockwashers away.
Go on to Sheet 2
7-138 Change 3
