TM9-2350-222-20-1-3
AIR CLEANER OUTLET ELBOW REPLACEMENT (Sheet 1 of 2)
9/16 in. socket with 1/2 in. drive
TOOLS:
Torque wrench with 1/2 in. drive
(0-175 lb.-ft) (0-237 Nm)
10 in. extension with 1/2 in. drive
Pry bar
9/16 in. combination box and open end wrench
Universal joint with 1/2 in. drive
SUPPLIES:
Gasket (12304168)
Self-locking nuts (MS21044-N6) (14 required)
PRELIMINARY PROCEDURES: Remove air cleaner (top loading, page 7-94; side loading, page 7-88)
NOTE
Removal of left or right outlet elbow is the same. Left side shown.
REMOVAL:
1.
Using socket and wrench, remove 14 nuts (A).
Using pry bar, loosen elbow (B) from air
2.
cleaner.
Remove elbow (B) and gasket (C). Throw
3.
gasket away.
4.
Inspect studs for damaged threads and for
stamping of H on ends. If threads are
damaged or ends are not stamped with H,
replace studs.
Go on to Sheet 2
TA249068
Change 2
7-76