TM9-2350-222-20-1-3
AIR CLEANER OUTLET HOSE ASSEMBLY REPLACEMENT (sheet 3 of 3)
Put clamp (C) on turbosupercharger
3.
elbow flange.
4.
Position hose assembly (D) between air
cleaner outlet elbow and turbosuper-
charger inlet elbow.
5.
Aline hose flange to turbosupercharger
elbow flange. Position clamp (C) on
hose assembly (D) and hand tighten
clamp nut.
Aline hose flange to air cleaner outlet elbow and install clamp (E).
6.
7.
Engage "T" bolts to hasp on clamp (E) and close clamp handle.
8.
Install pin (F) to secure clamp handle.
9.
Using socket,
tighten adjusting nut (G)
on clamp (E)
to eliminate clearance
and "Tf' bolt. Turn nut
between hasp
one additional
turn.
10.
Using socket and torque wrench, tighten
nut of clamp (C) to 25 to 35 lb. in. (3 to
4 Nm).
11.
Close top deck door assemblies (TM
9-235 0-222 -10).
End of Task
TA249067
Change 2
7-75
