TM9-2350-222-20-1-3
FUEL PUMP REPLACEMENT - RIGHT FUEL TANK (Sheet 1 of 6)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS: 7/16 in. socket with 1/2 in. drive
Diagonal cutting pliers
1/2 in. socket with 1/2 in. drive
Flat-tip screwdriver
9/16 in. socket with 1/2 in. drive
Offset flat-tip screwdriver
Ratchet with 1/2in. drive
3/8 in. combination box and open end wrench
Cross-tip screwdriver
Torque wrench with 1/2in. drive
(0-175 lb-ft) (0-237 Nm)
SUPPLIES: Sealing compound (Item 28, Appendix D)
Silicone compound (Item 32, Appendix D)
Rags (Item 65, Appendix D)
Lockwire (Item 59, Appendix D)
Gasket (10873918)
Gasket (11637078)
Lockwasher (MS35333-38)
Lockwasher (MS35338-44) (2 required)
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURES:
Isolate right fuel tank (TM
Drain right fuel tank (page
REMOVAL:
Open turret platform access door (A) (TM
1.
9-2350-222-10).
2.
Traverse turret to gain access to cover (B) in
subfloor over right fuel tank (TM
9-2350-222-10).
3.
Using offset flat-tip screwdriver, remove 14
screws securing access cover (B). Remove access
.
cover.
TURRET
REMOVED
FOR CLARITY
Go on to Sheet 2
7-61
