TM9-2350-222-20-1-3
POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT
(2D ENGINE) (Sheet 8 of 9)
15. Using alining punch, aline screw holes and,
using 9/16 inch socket and 9/16 inch wrench,
install eight capscrews and new self-locking
nuts (T).
Position bracket (U) to frame.
16.
Using 1/2 inch socket and 1/2 inch wrench,
17.
install two capscrews and new self-locking nuts
(V) to hold bracket (U) to frame.
Position ignition unit (W) with clamps and
18.
leads to frame.
Using 1/2 inch socket and 1/2 inch wrench,
19.
install two capscrews and new self-locking nuts
(x).
20.
Using 1/2 inch socket, install screw and
cushioned clamp (Y).
21.
Using 1/2 inch socket, install three assembled
washer bolts (Z).
Go on to Sheet 9
TA139484
6-116
