TM9-2350-222-20-1-3
POWER PLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT
(2D ENGINE) (Sheet 6 of 9)
INSTALLATION:
NOTE
may be necessary to
Because of space limitations, it
w r e n c h e s to get at a
interchange like-size sockets with
particular screw.
1.
Install screw (A) through bracket (B).
Position bracket (B) and screw (A) on engine.
2.
Install clamp (C) on screw (A).
3.
4.
Using 9/16 inch socket and 9/16 inch
wrench, install new self-locking nut (D).
5.
Using 1/2 inch socket with extension, install
new self-locking nuts (E).
Position bracket (F) on engine.
6.
7.
Using 1/2 inch socket with extension, or 1/2
inch wrench, install new self-locking nuts (G).
8.
Position clamp (H) on fuel line and install
screw (J) through clamp (H) and bracket (F).
9.
Using 1/2 inch socket and 1/2 inch wrench,
install new self-locking nut (K) on screw (J).
10.
Using 1/2 inch socket with extension. install
four brackets (L).
11.
Position frame support brackets (M) on engine
and, using 11/ 16 inch socket, install two new
self-locking nuts (N) to secure each frame
support bracket (M).
Go on to Sheet 7
TA139482
6-114
