Warning label (4) is located on the engine valve cover.
This warning label is a four-quadrant graphic label.
Quadrant (5) warns against injecting ether into the air
intake system. Quadrant (6) warns of an electrical
shock hazard. Quadrant (7) warns that damaged high-
pressure oil lines can cause injury. Quadrant (8) directs
personnel to read the service manual before
performing service on the engine.
The protection offered by this ROPS will be
impaired if it has been subjected to any
modification, structural damage, or has been
involved in an overturn incident. This ROPS must
be replaced after a roll-over. Seat belts must be
worn while operating vehicle.
Warning label (9) is located on the top right corner of
the cab, inside the operator’s compartment.
NOTE: ROPS is the acronym for Rollover Protective
Structure.
Do not operate or work in this machine unless
you have read and understand the instructions
and warnings in the operation and maintenance
manuals. Failure to follow the instructions or
heed the warnings could result in injury or death.
Contact any Caterpillar dealer for replacement
manuals. Proper care is your responsibility.
Warning label (10) is located on the console to the
right of the operator’s seat.
10
WARNING
!
9
WARNING
!
4
5
6
8
7
7
Safety Section
Safety
TM5-2430-200-10
