Fuel Tank Fill Cap
To remove fuel cap (1), raise lever (2) and turn the
lever counterclockwise. To install fuel cap (1), install
the cap, turn lever (2) clockwise and lower the lever.
Hydraulic Oil Tank Fill Cap
Remove—To remove the hydraulic oil tank fill cap, lift
and hold lever (1) while rotating cap (2)
counterclockwise.
Install—To install the hydraulic oil tank fill cap, lift and
hold lever (1) while rotating cap (2) clockwise.
Power Train Oil Fill Cap
The power train oil fill cap is located under rear
walkway (2). Raise the rear walkway and secure the
walkway in the up position by inserting the plungers
on the walkway into cups (1).
Remove—To remove the power train oil fill cap, rotate
cap (3) counterclockwise.
Install—To install the power train oil fill cap, rotate cap
(3) clockwise.
Secure rear walkway (1) in the down position by
lowering the walkway until plunger (4) inserts in cup
(5).
NOTE. Rear walkway (1) is equipped with one plunger
(4) and cup (5) on each side.
3
4
5
2
1
1
2
1
2
48
Operation Section
Machine Features
TM5-2430-200-10
