Seat Adjustment
Raise/Lower (1)—Lift and hold the lever up, raise or
lower the seat, and then release the lever to lock the
seat at the desired height.
Suspension (2)—Turn the knob clockwise to increase
the stiffness of the suspension. Turn the knob
counterclockwise to decrease the stiffness of the
suspension. When the desired stiffness is achieved, a
yellow indicator will be flush with the end of a small
tube at the lower left front of the seat frame.
Fore/Aft (3)—Move and hold the lever out (away from
the seat cushion), and slide the seat fore or aft. Release
the lever when the seat is in the desired position.
Mirrors
Move mirror (1) by hand to set the correct angle for
maximum visibility. The machine is equipped with a
mirror on both sides of the cab. Fold the mirrors
against the side of the cab when operating in areas
where the mirrors can be damaged by branches or
other objects.
Rear View Mirror
Loosen knob (2) and rotate mirror (1) up or down.
Tighten the knob when the mirror is in the desired
location.
PLGR Bracket
Mounting bracket (1) for the Precision Lightweight
GPS Receiver (PLGR) is located on the control
console to the right of the operator.
NOTE: Refer to Appendix F for PLGR installation
instructions.
1
1
2
1
1
2
3
35
Operation Section
Monitoring Systems and Cab Features
TM5-2430-200-10
