18
BLADE
NOTE: For illustrations of the lubrication
points, refer to “Maintenance Section,
Lubrication Chart” and “Every 50 Service
Hours or Weekly, Blade” in this manual.
Weekly
Lubricate the blade grease fittings. There
are ten fittings.
• The equipment is not
ready/available if grease does
not flow out of the pin seals
when grease is added to the
joint.
19
PINTLE HOOK
NOTE: For illustrations of the lubrication
points, refer to “Lubrication Chart” and
“Maintenance Section, Every 50 Service
Hours or Weekly, Pintle Hook” in this
manual.
Weekly
Lubricate the pintle hook grease fittings.
There are three fittings.
20
WINCH
NOTE: For illustrations of the lubrication
points, refer to “Maintenance Section,
Lubrication Chart” and “Every 250 Service
Hours or 3 Months, Winch” in this manual.
Quarterly (1) Lubricate fairleads. There are four
fittings.
Quarterly (2) Lubricate the doubling block. There is
one fitting.
NOTE: The doubling block is normally
stored in the BII box.
PREVENTIVE MAINTENANCE CHECKS AND SERVICES—DEUCE
Item
No.
Interval
Item To Be Inspected
Equipment Status
A–22
TM5-2430-200-10
