TM5-2430-200-10 PREVENTIVE MAINTENANCE CHECKS AND SERVICES—DEUCE Item No. Interval Item To Be Inspected Equipment Status Before (4)  Check blade for cracks, bending, or   loose or missing fasteners.  The equipment is not   ready/available if any   components are cracked   or bent, or any fasteners are   loose or missing. 3 Before Before Before WINCH NOTE: For illustrations of these steps,   refer to “Maintenance Section, Every 10   Service Hours or Daily, Winch” in this   manual. (1)   Check the winch motor and attached   hoses for leaks. Also, check any other   visible hoses at the rear of the   machine for leaks. (2)  Check the winch frame for cracks,   bending, or loose or missing fasteners. (3)  Check for cracked or bent fairlead   rollers. The equipment is not   ready/available if class Ill leaks are present.  The equipment is not ready/available if there are any cracks, bent components, or loose or missing fasteners and mission requires use of winch.  The equipment is not   ready/available if any roller is bent or cracked and mission requires use of a winch. . A-8